Canon PowerShot S3 IS Advanced User's Manual page 133

Protected!
You attempted to erase or edit a protected image, movie or sound.
Too many marks
Too many images have been marked with print settings, transfer settings, or slide
shows. Cannot process any more.
Cannot complete!
Could not completely save the print, transfer or slide show settings.
Unselectable image.
You attempted to set the print settings for a non-JPEG image.
Cannot edit
The file specified for slide show playback is damaged.
Communication error
The computer was unable to download the image due to the large amount of images
(approx. 1000) stored on the memory card.
Lens error, restart camera
Camera detected an error while moving the lens and cut the power automatically. This
error message may appear if you press on the lens while it is moving or power up the
camera in a dusty or sandy environment. Power up the camera again and shoot or
playback images. Take the camera to a service center if this message appears
frequently because there may be a problem with the lens.
Exx
(xx: number) Camera detected an error. Turn the power off and then back on, then
shoot or play back. A problem exists if the error code reappears. Note the number and
contact your Canon Customer Support Help Desk. If an error code displays directly
after taking a picture, the shot may not have been recorded. Check image in playback
mode.
131