Picture Adjustments - Panasonic TH-86CQ2U Operating Instructions Manual

Picture Adjustments

1
Press <MENU> to display the [Picture]
menu.
Picture mode
Advanced
Backlight
Brightness
Contrast
Color
Tint
Sharpness
Reset
2
Select the item to adjust with <
●
Menu that cannot be adjusted is greyed out.
3
Adjust with <
4
Press <EXIT> to exit from adjust
mode.
■
To return to the previous screen
Press <MENU>.
[Picture mode]
[Advanced]
32
English
Picture
Standard
>.
This menu switches to easy-to-
see pictures suitable to the picture
source or environment where this
unit is used.
[Dynamic]:
Improves contrast and sharpness
for viewing in a bright room.
[Sports]:
Suitable for sports matches.
[Graphic]:
Suitable for PC input.
[Standard]:
For viewing in standard (evening
lighting) environments.
Selects advanced video settings.
[Aspect ratio]:
Changes the aspect mode.
(see page 29)
[Overscan]:
Sets the scan mode.
[Color temperature]:
Adjusts colour tone.
20
50
50
50
50
10
>.
[Preset]:
The preset color temperatures
(6500K/9300K/12000K/Native)
can be set.
Note
●
Smaller the [Preset] value, red is
emphasized. Larger the [Preset]
value, blue is emphasized.
● When [Native] is selected, the
original colour tone for the LCD
panel is reproduced.
[Custom]:
The colour temperature can be
set by the user.
[Noise reduction]:
Sets to reduce the video noise.
Note
●
This menu is grayed out for
signals other than HDMI YUV
signal.
[Dynamic backlight control]:
Optimizes the backlight brightness
to enhance contrast and reduce
total power consumption.
[Gamma]:
Selects the gamma curve.
[HDMI RGB Signal Range]:
Switches the dynamic range
depending on the input signal of the
HDMI terminal.
This is enabled only for RGB signal
input.
[Video(16-235)]:
When the input signal is in video
range
[Full(0-255)]:
When the input signal is in full
range
[Auto]:
Automatically switches the
dynamic range to [Video(16-235)]
or [Full(0-255)] depending on the
input signal.
[Dynamic contrast]:
Automatically adjusts the contrast by
determining the changes in the use
of colours for images that constantly
change, such as motion pictures.
● The adjustment operation may
not be smooth depending on the
image. In this case select [Off].
Note
●
This menu is grayed out for
signals other than HDMI YUV
signal.