Remote Control Transmitter - Panasonic TH-86CQ2U Operating Instructions Manual

Remote Control Transmitter

1 POWER ON button ( )
●
Turns the power on (Picture is displayed) when the
TV is turned off (Standby condition).
2 STANDBY button ( )
●
Turns the power off (Standby condition) when the
TV is turned on.
3 Numeric buttons (0 - 9) / ∙
●
Changes channel. You can also use the button
when you enter numeric or dot.
●
Input numbers in LAN settings.
4 PICTURE
● Adjust Picture mode. (see page 32)
5 AUDIO
●
Changed MTS or audio language. (see page 33)
6 VOL + / VOL -
●
Adjusts sound volume level. (see page 28)
7 Navigation keys ( , , ►,
● Used in the USB menu and HDMI CEC function.
)
8 ENTER / Cursor buttons (
●
Used to operate the menu screens. (see page 30)
9 EXIT
●
Turns off the menu screens. (see page 30)
10 DISPLAY
● Displays information about the TV. (see page 28)
11 ASPECT
●
Change aspect ratio. (see page 29)
12 FAVORITE
●
Displays registered favorite channel list.
13 MUTE
● Sound mute on / off. (see page 28)
14 CH ˄ / ˅
●
Changes channel.
15 INPUT
●
Switches input to display on the screen.
(see page 27)
16 MENU
●
Press to open the OSD menu. (see page 30)
Note
●
In this manual, buttons of the remote control and the
unit are indicated as < >.
(Example: <INPUT>.)
The operation is mainly explained indicating the
remote control buttons but you can also operate with
the buttons on the unit when there are the same
buttons.
)
25
English