Aspect Controls - Panasonic TH-86CQ2U Operating Instructions Manual

ASPECT Controls

Press <ASPECT> to move through the aspect
options:
[Normal] → [Zoom] → [Full] → [Native]
Note
●
The aspect mode is memorised separately for each
input terminal.
■
List of Aspect Modes
Aspect
mode
Picture
Normal
Pictures are displayed with the aspect ratio of
input signals.
Zoom
Pictures are displayed in full screen with the
aspect ratio of input signals. Edges of the
pictures may not be displayed.
Full
Pictures are displayed filling the screen.
Native
According the input signals to display the
picture. Refer to "Preset Signals" (see page
52) for the applicable input signal that can be
displayed.
Description
Enlarged screen
Note
● [Native] cannot be used for video signals exceeding
the resolution of 3 840 x 2 160 and for the interlace
signal.
[Zoom] cannot be used with PC input.
● Using this TV's screen-size switching function to
compress or expand the screen for commercial
or public viewing in establishments like cafes or
hotels may infringe on the rights of the creators, as
protected by Copyright Law, so please be careful.
●
The appearance of the original video may change if
you select a screen size with a different aspect ratio
than the original image (e.g. TV broadcast or video
input from external equipment).
● When 4:3 video is viewed with the whole screen using
the screen-size switching function of this TV, the edge
of the video may be lost or appear distorted. If you
wish to respect the creator's intentions, set the screen
size to [Normal].
●
When playing commercial software, parts of the
image (like subtitles) may be cropped. In this case
select the optimal screen size using the screen-size
switching function of this TV. With some software,
there may be noise or distortion at the edges of
the screen. This is due to the characteristics of the
software, and is not a malfunction.
●
Depending on the original video size, black bands
may remain at the edges of the screen.
29
English