Table of Contents
Advertisement
Identifying Controls
Display
1 Power Indicator / Remote control sensor
The Power Indicator will light.
When the power of the unit is ON
(Power button (
●
Picture is displayed: Green
●
When the unit enters the standby mode:
Red or orange
When the unit enters the standby state with the
following functions: Orange
Standby state when [Power save mode] is set
•
to [Disable]
For details of the [Power save mode] function
(see page 38)
Standby state when the [Power Management]
•
function is activated
For details of the [Power Management] function
(see page 38)
Standby state when the [Setup Timer] function
•
is being used
For details of the [Setup Timer] function (see
page 35)
Standby states in conditions other than the
above: Red
24
English
(Unit): ON)
INPUT
MENU
3
4
5
1 External input / output terminal
Connects to video equipment, PC, etc. (see page 17)
2 Main power switch (
Turns OFF (
) or ON ( ) the main power.
Turning ON and OFF the <Main power switch> is the
same as plugging and unplugging the power plug.
Turn ON ( ) the main power first, and then turn
OFF or ON the power using the Power button of the
remote control or the unit.
3 Power button (
) (Unit)
When the <Main power switch> of the TV is turned
ON ( ), use this button to turn the power on or let the
unit enter the standby state. (see page 27)
4 INPUT (Unit)
Selects the connected device. (see page 27)
5 MENU (Unit)
Displays the menu screen. (see page 30)
6 + (Unit) / - (Unit)
Adjusts the volume. (see page 28)
On the main screen, switches settings or adjusts
settings level. (see page 30)
7
(Unit) /
(Unit)
When TV input, changes the channel.
Selects the setting item on menu screen. (see page
30)
8 ENTER (Unit)
Configures the item on menu screen. (see page 30)
Note
●
To output sound from the built-in speakers of the
unit, be sure to set [Speaker] in the [Sound] menu
to [Enable]. (see page 33)
2
1
-
+
ENTER
6
7
8
) (Unit)
- Quick Links:
- Network Settings
Hide quick links:
Advertisement
Table of Contents
