1. Manuals
  2. Brands
  3. Ip.Access Manuals
  4. Wireless Access Point
  5. nano3G 243B
  6. Instruction manual

Ip.Access nano3G 243B Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
nano3G AP Installation Manual
N3G_INST_300
292_1.0
ip.access Ltd
Building 2020
Cambourne Business Park
Cambourne
Cambridgeshire CB23 6DW
United Kingdom
www.ipaccess.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the nano3G 243B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ip.Access nano3G 243B

Summary of Contents for Ip.Access nano3G 243B

  • Page 1 AP Installation Manual N3G_INST_300 292_1.0 ip.access Ltd Building 2020 Cambourne Business Park Cambourne Cambridgeshire CB23 6DW United Kingdom www.ipaccess.com...
  • Page 2 (a) the quality of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services.
  • Page 3 Revision History Version Change Summary Date Author 292_0.1 Draft for N3G_2.92 and S16 information 22 Aug 2012 292_0.2 Updated with S16 information 14 Sep 2012 292_1.0 Released for N3G_2.92 18 Sep 2012...

  • Page 4: Table Of Contents

    E8 AP and E16 AP Installation Tool Requirements......30 Pre-Provisioning a nano3G AP............31 Pre-Provisioning Parameters ................31 Create a Site for a New AP................31 nano3G AP Installation Manual N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page i...
  • Page 5 Unpack the nano3G S16 AP ................67 6.3.2 Commission the nano3G S16 AP............... 68 6.3.3 Cable Connections ..................... 68 6.3.4 Mount the nano3G S16 AP ................69 nano3G AP Installation Manual N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page ii...
  • Page 6 Safety Standards....................99 9.3.4 Environmental Standards ................. 100 Regulatory Statements for nano3G S16 AP ..........101 9.4.1 US FCC Compliance ..................101 9.4.2 EU Regulatory Compliance ................102 nano3G AP Installation Manual N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page iii...
  • Page 7 Regulatory Statements for nano3G E16 AP ..........103 9.5.1 US FCC Compliance ..................103 9.5.2 EU Regulatory Compliance ................103 9.5.3 Safety Standards....................104 9.5.4 Environmental Standards ................. 104 nano3G AP Installation Manual N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page iv...

  • Page 8: Introduction

    Introduction The ip.access nano3G AP is an indoor Access Point for enterprise applications. This manual provides all the necessary information required to install an ip.access nano3G AP. The manual provides step-by-step instructions for hardware installation and configuration steps required to bring a nano3G AP into service.

  • Page 9: Related Information

    Portions of the AP are constructed from third-party software and open source code and ip.access ltd gratefully acknowledges the contributions that these libraries, technologies and components have made to the product. Each of these is supplied under the terms of a license agreement and these are either reproduced or referenced in [REF_300], in line with the stipulations of their authors.

  • Page 10: Installation Overview And Requirements

    • This also means that a nano3G S8 AP or nano3G S16 AP could be installed by an end customer, without help from a site installation engineer. The customer simply needs to provide suitable network and power connections. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 3...

  • Page 11: On Site Installation

    E8 AP or E16 AP is installed by a suitably qualified site installation engineer. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 4...

  • Page 12: Requirements For All Nano3G Aps

    • If a firewall is in place on the network an AP will use for backhaul, this must be configured to allow traffic to and from the AP - see the port usage section below nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 5...
  • Page 13 AP > Firewall > DHCP Server Protocol Destination Port DHCP - not needed for static IP configuration DHCP - not needed for static IP configuration nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 6...

  • Page 14: Nano3G Ap Cooling

    Client, the user name must have Full Access to the NOS Server serving the AP and Full Access granted to its APs. See [OPM_415] for full details about user permissions. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 7...

  • Page 15: Parameters For Enterprise Deployments

    AP hardware. Lat, Long and LCS uncertainty Latitude and longitude of the APs installation site, for RANAP (lcsLatitude), (lcsLongitude), location reporting (lcsUncertainty) nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 8...
  • Page 16 Whether or not PS RABs will handover between an AP and the (psHandoverEnabled) macro network. This is disabled (false) by default. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 9...

  • Page 17: Parameters For Residential Deployments

    AP’s site. AC address (acAddressinUse) IP Address or FQDN of the serving AC. MCC (mcc) Mobile Country Code. MNC (mnc) Mobile Network Code. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 10...
  • Page 18 AP hardware. Lat, Long and LCS uncertainty Latitude and longitude of the APs installation site, for RANAP (lcsLatitude), (lcsLongitude), location reporting (lcsUncertainty) nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 11...
  • Page 19 A UE that is on the white list for multiple APs can only be Allowed to do this on one AP. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 12...

  • Page 20: Access Control

    Use the following attribute settings: Attribute Setting Notes CSG Access Mode Open This is the default for nano3G APs. (csgAccessMode) No other settings are required. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 13...
  • Page 21 GSMA OneAPI is outside the scope of this manual. Refer to manuals covering the nano3G System NOS for further information. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 14...

  • Page 22: Closed Access With Csg Parameter Broadcast

    List of IMSIs and This is provisioned against an AP but used by corresponding the AAA service in the NOS. (accessControlList) phone numbers nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 15...

  • Page 23: Closed Access In Legacy Mode

    List of IMSIs and This is provisioned against an AP but used by corresponding the AAA service in the NOS. (accessControlList) phone numbers nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 16...

  • Page 24: Pre-Prepared Configurations - Optional

    AP object after it has been created by the Create Site Wizard. For information on working with templates, see [OPM_415]. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 17...

  • Page 25: Information Required For Commissioning

    For connecting to the AP from the commissioning terminal: • User name and password for the AP web server - if necessary, contact customer support at ip.access for the current user name and password For commissioning the AP: • IP Address or FQDN of the serving NOS Server •...

  • Page 26: Other Items For Commissioning

    The items in this section can only be used if the commissioning terminal is running a web server that provides a path to any ip.access AP software download packages. That is, the required .sdp files must be present on the commissioning terminal.

  • Page 27: Nano3G S8 Ap Site Requirements

    • Power over Ethernet from a POE switch, via the POE splitter A POE cable must not be inserted directly into the AP. The power adapter, as well as the POE inserter and splitter supplied by ip.access comply with LPS requirements in accordance with IEC/EN 60950-1.
  • Page 28 Power Adapter A suitable mains power supply point into which the power adapter for the AP can be plugged. Only use the power adapter available from ip.access to power the AP: ip.access part number PSA15R-090PV-R Input 100-240V ~ 50/60Hz 0.5A Output +9VDC 1.67A...

  • Page 29: Nano3G S8 Ap Physical Requirements

    Only use the POE splitter available from ip.access: ip.access part number 222A Input 48VDC 0.35A Output 9VDC 1.33A 2.3.2 nano3G S8 AP Physical Requirements A nano3G S8 AP may be installed in one of the following ways (see section 6.2.4): •...

  • Page 30: Nano3G S8 Ap Ip Bandwidth Requirements

    • Suitable drills and screwdriver Note: If the available bandwidth on site does not meet the requirements see the Troubleshooting section 8 N User Configuration. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 23...

  • Page 31: Nano3G S16 Ap Site Requirements

    • Power over Ethernet from a POE switch, via the POE splitter A POE cable must not be inserted directly into the AP. The power adapter, as well as the POE inserter and splitter supplied by ip.access comply with LPS requirements in accordance with IEC/EN 60950-1.
  • Page 32 Power Adapter A suitable mains power supply point into which the power adapter for the AP can be plugged. Only use the power adapter available from ip.access to power the AP: ip.access part number PSA15R-090PV-R Input 100-240V ~ 50/60Hz 0.5A Output +9VDC 1.67A...

  • Page 33: Nano3G S16 Ap Physical Requirements

    Only use the POE splitter available from ip.access: ip.access part number 222A Input 48VDC 0.35A Output 9VDC 1.33A 2.4.2 nano3G S16 AP Physical Requirements A nano3G S16 AP may be installed in one of the following ways (see section 6.2.4): •...

  • Page 34: Nano3G S16 Ap Ip Bandwidth Requirements

    • Suitable drills and screwdriver Note: If the available bandwidth on site does not meet the requirements see the Troubleshooting section 8 N User Configuration. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 27...

  • Page 35: Nano3G E8 Ap And Nano3G E16 Ap Site Requirements

    The Ethernet cable carrying POE+ must be plugged into the LAN 1 port. The LAN 2 port, next to LAN 1, is not used and does not support POE. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 28...

  • Page 36: Nano3G E8 Ap And E16 Ap Physical Requirements

    AP. Therefore, the maximum cable run from the network switch to the AP is 100m, regardless of the placement of the POE+ injector. The POE+ injector supplied by ip.access complies with LPS requirements in accordance with IEC/EN 60950-1.

  • Page 37: Nano3G E8 Ap Ip Bandwidth Requirements

    • Suitable drills and screwdriver. Note: If the available bandwidth on site does not meet the requirements see the Troubleshooting section 8 N User Configuration. nano3G AP Installation Manual Installation Overview and Requirements N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 30...

  • Page 38: Pre-Provisioning A Nano3G Ap

    Right-click the BSMIS object and, from the menu, select Create > Create Site. The first page of the Create Site Wizard will appear: nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 31...

  • Page 39: Optional - Use An Existing Ap Configuration

    Click Next and the AP Selection page of the wizard will appear: Optionally use this page to copy the configuration of an existing AP. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 32...

  • Page 40: Optional - File Selection

    NOS Client • From server file - a configuration file saved on the NOS server by saving the attributes from an AP nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 33...
  • Page 41 Click the required configuration file in the list, then click Load. The list will close and the file name will be shown in the box for Server file. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 34...

  • Page 42: Optional - Select An Ap Template

    AP’s serial number will be updated. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 35...

  • Page 43: Select Ap Location

    To provide the location of the configured AP, enter the Latitude, Longitude and Radius of Uncertainty to the appropriate fields (optional), this will verify the AP, then click Next. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 36...

  • Page 44: Select Ntp Servers

    • MCC and MNC: These are copied from the target AC. That is, the AC associated with the parent AC Detail object. The RNC-Id is also copied, but this is not shown in the wizard. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 37...
  • Page 45 AP object directly or load pre-configured lists against the AP object. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 38...
  • Page 46 Multiple RACs can be configured for each LAC. At least one LAC/RAC combination must be provided. Select the RF Parameters Candidate List. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 39...
  • Page 47 Drill down into the list entry. For a new list item, all the values will be zero, as in this example: Enter or modify the uarfcn, scramblingCode and dummyCellId values for this Click Finish. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 40...
  • Page 48 The site and the AP object will be added under the BSMIS APs Per AC object and can now be selected for further actions. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 41...

  • Page 49: Apply An Attribute Configuration To The Ap

    To start the NOS Load Attributes Wizard, right-click on the AP object in the NOS Client and then select Load Attributes From File. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 42...

  • Page 50: Apply An Ap Template To The Ap

    The object type must match. That is, use an apNano8_020 template for E8 APs, E16 APs and S8 APs. Choosing a template with a different object type will have no effect on the target AP. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 43...
  • Page 51 Click OK. The attribute settings in the template will be applied to the AP object. Repeat as needed, if there are multiple templates to apply. nano3G AP Installation Manual Pre-Provisioning a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 44...

  • Page 52: Configuration File Preparation

    AP that has already been fully configured, and then edited to remove non-generic attributes. Once the generic file has been created, it must be saved for each AP, with the correct DN. nano3G AP Installation Manual Configuration File Preparation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 45...

  • Page 53: Create A Configuration File For Nano3G Aps

    Select To local file and use the browse button to choose a suitable directory on the client computer for saving the AP configuration file (the browser dialogue can also create new directories). nano3G AP Installation Manual Configuration File Preparation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 46...

  • Page 54: Save Attributes To File For Multiple Aps

    BSMIS APs Per AC object) then locate the APwithin its Site. Hence, drill down to the AP like this: Root > APs > BSMIS APs Per AC nano3G AP Installation Manual Configuration File Preparation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 47...
  • Page 55 Click Finish. A confirmation message stating file copied successfully will appear, click OK. One configuration file will be saved in the directory for each AP object. nano3G AP Installation Manual Configuration File Preparation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 48...

  • Page 56: Commission A Nano3G Ap

    Click the Use the following IP address radio button. Set the IP Address to 192.168.0.2. Set the Subnet Mask to 255.255.255.0. nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 49...

  • Page 57: Start Up The Ap

    LAN input on the POE+ injector unit • If not using POE+, connect the Ethernet cable from the commissioning terminal directly to the LAN1 port on the AP nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 50...

  • Page 58: Access The Commissioning Web Page For The Ap

    Enter the commissioning user name and the password (supplied separately for security reasons). nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 51...
  • Page 59 After entering the correct user name and password, the Connection Config page appears: nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 52...

  • Page 60: Download Activities

    See section 2.2.11 for extra information about software and ATAS packages. This can only be done if the commissioning terminal is running a web server that provides a path to any ip.access AP software download packages. That is, the required .sdp files must be present on the commissioning terminal.

  • Page 61: Atas Check And Download

    (SecGW) that will terminate the IPsec connection for the AP. If the ATAS package is incorrect, the AP will not connect to the SecGW and hence will be unable to enter service. nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 54...
  • Page 62 Inspect the ATAS version information on the ATAS Download page to verify it is now correct. nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 55...

  • Page 63: Configure The Connection To The Nos Server

    (information about how to take a screenshot is outside the scope of this manual). Click the Connection Config link on the left. nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 56...

  • Page 64: Configure The Nos Server Connection

    Acknowledge the warning about changes in the IP configuration and click OK. When the initial configuration is complete, power off the AP and disconnect it from the commissioning terminal. nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 57...
  • Page 65 AP connecting to its serving NOS Server, the commissioning procedure must be started again after resetting the AP with a factory reset. See section 8.3 for factory reset instructions. nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 58...

  • Page 66: Commissioning Finished

    The Site for the AP and the AP object should have a green tick symbol against its icon. After verifying this, re-pack the AP so that it is ready for delivery to its intended site. nano3G AP Installation Manual Commission a nano3G AP N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 59...

  • Page 67: Nano3G Ap Hardware Installation

    For residential deployments where an AP is installed by an end-user following an easy setup guide, ignore all of section 6. Warnings and Regulatory Information For all warnings and regulatory information, see section 9. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 60...

  • Page 68: Nano3G S8 Ap Hardware Installation

    Check that the items have not been damaged in transit. For any damaged units, contact the supplier immediately for returns advice. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 61...

  • Page 69: Commission The Nano3G S8 Ap

    In this case, the PSU for the AP is not used. The injector takes a direct mains input using the supplied mains cable. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 62...

  • Page 70: Mount The Nano3G S8 Ap

    • Onto the splitter unit on the wall at or above head height The nano3G S8 AP has two holes at the back for direct wall mounting or mounting on the POE splitter: nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 63...
  • Page 71 Place the AP on its stand on a stable flat surface. Mount the nano3G S8 AP directly onto the wall Drill two holes 70mm (2.76in) apart vertically for the two screws. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 64...
  • Page 72 POE splitter below the AP where the 100mm cables will reach the AP. Slide the AP onto the 2 screws. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 65...
  • Page 73 Plug the captive Ethernet cable and the power cable from the splitter unit into the Mount the AP onto the 2 screws that are already fixed onto the splitter unit. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 66...

  • Page 74: Nano3G S16 Ap Hardware Installation

    Check that the items have not been damaged in transit. For any damaged units, contact the supplier immediately for returns advice. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 67...

  • Page 75: Commission The Nano3G S16 Ap

    In this case, the PSU for the AP is not used. The injector takes a direct mains input using the supplied mains cable. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 68...

  • Page 76: Mount The Nano3G S16 Ap

    • Onto the splitter unit on the wall at or above head height The nano3G S16 AP has two holes at the back for direct wall mounting or mounting on the POE splitter: nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 69...
  • Page 77 POE splitter into the AP. Slide the AP onto the stand. Place the AP on its stand on a stable flat surface. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 70...
  • Page 78 POE splitter below the AP where the 100mm cables will reach the AP. Slide the AP onto the 2 screws. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 71...
  • Page 79 Plug the captive Ethernet cable and the power cable from the splitter unit into the Mount the AP onto the 2 screws that are already fixed onto the splitter unit. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 72...

  • Page 80: Nano3G E8 Ap And E16 Ap Hardware Installation

    The nano3G E8 AP and E16 AP have two removable covers. The top cover goes over the antennae, and the bottom cover goes over the cable sockets. Place the unit on a flat surface. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 73...

  • Page 81: Antennas

    Unscrew the antennas to expose the SMA connectors. Connect external antennas directly to the SMA connectors. Route the cables out of the way of the antenna cover, then refit the cover. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 74...

  • Page 82: Commission The Ap

    Two power supply modules are available from ip.access, designed for use with the ip.access nano3G E8 AP and E16 AP, that are compliant with the IEEE 802.3at standard: • The POE+ injector, as supplied, is commonly used for single site installations •...
  • Page 83 PSU. This is typically less than 2m. The PSU for the E8 AP or E16 AP is an optional extra. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 76...

  • Page 84: Mount The Nano3G E8 Ap Or E16 Ap On A Wall

    AP. The removal tool may be inserted from the top or bottom of the AP. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 77...
  • Page 85 E8 AP or E16 AP unit to be mounted with the connections either at the top or at the bottom of the unit. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 78...
  • Page 86 Remove the lower cover to reveal the cable ports and LEDs. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 79...
  • Page 87 Do not connect an Ethernet cable to LAN2. This will have no effect. To refit the lower cover, slide it onto the tabs on the main cover until it snaps into place. nano3G AP Installation Manual nano3G AP Hardware Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 80...

  • Page 88: Finalize Installation

    If the AP does not have the latest software image, download it to the AP from the NOS Server according to the instructions in section 7.1.2. nano3G AP Installation Manual Finalize Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 81...

  • Page 89: Download The Latest Software Image From The Nos Server To The Ap

    Select the 3G AP Admin Package for the AP object and verify that the Filesys version reported by the Active Software Version matches the SDP file that was downloaded. nano3G AP Installation Manual Finalize Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 82...

  • Page 90: Finalize Configuration

    When a stored configuration maximum has been reached the oldest stored configuration will be deleted to make way for the newly stored configuration of a Managed Object. nano3G AP Installation Manual Finalize Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 83...
  • Page 91 Rollback is possible Click Apply to save the changes, click Cancel to abandon any changes. nano3G AP Installation Manual Finalize Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 84...

  • Page 92: Network Listen And Frequency Correction

    If the installation engineer is still on site, the engineer should make CS and PS test calls to verify the AP is providing service. nano3G AP Installation Manual Finalize Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 85...

  • Page 93: Disable Web Interface From Nos

    If the Apply button is not available, use the TAB key to exit field entry first. Right-click the AP object and select Reinitialise. This restarts the AP so that it uses the configuration change. nano3G AP Installation Manual Finalize Installation N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 86...

  • Page 94: Troubleshooting

    Factory reset is in progress in the AP (the reset button was pressed green blinks on for more than 5 seconds). On, with short Software download is in progress to the AP. green blinks off nano3G AP Installation Manual Troubleshooting N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 87...

  • Page 95: Nano3G S8 Ap Leds

    Factory reset is in progress in the nano3G AP (the reset button was green blinks on pressed for more than 5 seconds). On, with short Software download is in progress to the nano3G AP. green blinks off nano3G AP Installation Manual Troubleshooting N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 88...

  • Page 96: Nano3G S16 Ap Leds

    • Verify the Ethernet cable from the POE+ inserter is plugged into the correct socket (LAN1). • If using a DC power supply instead of POE+, verify the power supply is a 12V supply with the correct polarity. nano3G AP Installation Manual Troubleshooting N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 89...

  • Page 97: Factory Reset

    (200ms on, 200ms off). When the factory restore process is complete, the LED extinguishes and the AP automatically reboots, takes the fixed IP address and enables the web interface for commissioning. nano3G AP Installation Manual Troubleshooting N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 90...

  • Page 98: Nano3G S16 Ap Factory Reset

    See section 5 for the commissioning procedure. nano3G AP Installation Manual Troubleshooting N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 91...

  • Page 99: Nano3G E8 Ap And Nano3G E16 Ap Factory Reset

    See section 5 for the commissioning procedure. nano3G AP Installation Manual Troubleshooting N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 92...

  • Page 100: Options For A Low Bandwidth Connection

    Log into the NOS Client and find the AP. The user ID must have Full Access rights to the AP. Hence find, Root > APs > BSMIS APs Per AC > Site > relevant AP. nano3G AP Installation Manual Troubleshooting N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 93...

  • Page 101: Dynamic Backhaul Management (Dbm)

    Select the attribute max Downlink Backhaul Bit Rate (Kbps) and set to the relevant value. Select the attribute max Uplink Backhaul Bit Rate (Kbps) and set to the relevant value. Click Apply to save changes. nano3G AP Installation Manual Troubleshooting N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 94...

  • Page 102: Nano3G Ap And Psu Regulatory Information

    CAUTION Do not disassemble the nano3G AP or its power supply. CAUTION The nano3G AP must only be powered using the ip.access power supply provided for use with the nano3G AP. CAUTION Before using the power supply, verify that the mains voltage is within the range specified by the voltage printed on the power supply.
  • Page 103 CAUTION Do not attempt to fit an external antenna or antenna cabling to the nano3G S8 AP. nano3G AP Installation Manual nano3G AP and PSU Regulatory Information N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 96...

  • Page 104: Regulatory Statements For Nano3G S8 Ap

    This product is intended for use in all Member States of the European Union. "Hereby, ip.access Ltd, declares that this nano3G S8 AP is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC." nano3G AP Installation Manual nano3G AP and PSU Regulatory Information N3G_INST_300 v292_1.0 for N3G_2.92 ©...

  • Page 105: Safety Standards

    9.2.3 Safety Standards • IEC 60950-1:2005 (2nd Edition), EN 60950-1:2006 and UL60950-1:2007 The power adapter, as well as the POE inserter and splitter supplied by ip.access comply with LPS requirements in accordance with IEC/EN 60950-1. nano3G AP Installation Manual nano3G AP and PSU Regulatory Information N3G_INST_300 v292_1.0 for N3G_2.92 ©...

  • Page 106: Regulatory Statements For Nano3G E8 Ap

    This product is intended for use in all Member States of the European Union. "Hereby, ip.access Ltd, declares that this nano3G E8 AP is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC." A copy of regulatory compliance documentation may be obtained in writing from "IP Access Ltd, Building 2020, Cambourne Business Park, Cambourne, Cambridge, CB23 6DW, UK".

  • Page 107: Environmental Standards

    The POE+ inserter supplied by ip.access complies with LPS requirements in accordance with IEC/EN 60950-1. 9.3.4 Environmental Standards • ETSI 300 019-2-3 • ETSI 300 019-2-2 nano3G AP Installation Manual nano3G AP and PSU Regulatory Information N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012...

  • Page 108: Regulatory Statements For Nano3G S16 Ap

    AP Installation Manual nano3G AP and PSU Regulatory Information N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 101...

  • Page 109: Eu Regulatory Compliance

    9.4.3 Safety Standards • IEC 60950-1:2005 (2nd Edition), EN 60950-1:2006 and UL60950-1:2007 The power adapter, as well as the POE inserter and splitter supplied by ip.access comply with LPS requirements in accordance with IEC/EN 60950-1. nano3G AP Installation Manual nano3G AP and PSU Regulatory Information N3G_INST_300 v292_1.0 for N3G_2.92 ©...

  • Page 110: Regulatory Statements For Nano3G E16 Ap

    This product is intended for use in all Member States of the European Union. "Hereby, ip.access Ltd, declares that this nano3G E16 AP is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC." A copy of regulatory compliance documentation may be obtained in writing from "IP Access Ltd, Building 2020, Cambourne Business Park, Cambourne, Cambridge, CB23 6DW, UK".

  • Page 111: Safety Standards

    9.5.3 Safety Standards • IEC 60950-1:2005 (2nd Edition) and EN 60950-1:2006 The POE+ inserter supplied by ip.access complies with LPS requirements in accordance with IEC/EN 60950-1. 9.5.4 Environmental Standards • ETSI 300 019-2-3 • ETSI 300 019-2-2 nano3G AP Installation Manual nano3G AP and PSU Regulatory Information N3G_INST_300 v292_1.0 for N3G_2.92 ©...

This manual is also suitable for:

Nano3g 243baQggipa243bQggipa243ba

Table of Contents