Table of Contents
Advertisement
Safety instructions for installation
Risk of damage from incorrect installation.
Incorrect installation can cause damage to the SmartLine appliance.
The SmartLine appliance must only be installed by a suitably qualified and
competent person.
Damage from falling objects.
Take care not to damage the SmartLine appliance when fitting wall units above
it.
Fit the wall units before the SmartLine appliance.
After installation, the mains connection cable of the SmartLine
appliance must not come into contact with any moving kitchen
component (e.g. a drawer) or be subject to mechanical loads which
could damage it.
Combination with gas appliances
Only Miele CS 7xxx gas appliances may be installed next to the
downdraft extractor.
Carefully observe the safety clearances listed on the following
pages.
All pipework, ducting and fittings must be of non-flammable
material and comply with all relevant national and local building
regulations.
The appliance must not be connected to a chimney or vent flue
which is in current use for exhausting fumes from appliances burning
gas or other fuels. Neither should it be connected to ducting which
ventilates rooms with fireplaces.
If exhaust air is to be extracted into a chimney or ventilation duct
no longer used for other purposes, seek professional advice.
Installation
29
Advertisement
Table of Contents
