Operating The Receiver From Another Zone (Zone 2/Zone 3 Operations) - Sony STR-DA5400ES Operating Instructions Manual

Operating the receiver
from another zone
(ZONE 2/ZONE 3 operations)
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.
MASTER
VOL
96
GB
Operating the receiver from
zone 2
1
Turn on the main receiver (this
receiver).
2
In the case of illustration 1-2
(page 90), turn on the amplifier
in zone 2.
3
Press ZONE.
The remote switches to zone 2.
?/1
4
Press ?/1.
The zone function is activated.
ZONE
5
Press MENU.
Input
The menu is displayed on the TV screen.
buttons
6
Press V/v to select "
then press
7
Press V/v to select the input
source you want, then press
For zone 2, analog video and audio
signals are output. When you select
V/v/b,
SOURCE, the signals of the current input
of the main zone are output to the ZONE
2 OUT jack.
MENU
8
Adjust to a suitable volume.
• In the case of illustration 1-1
• In the case of illustration 1-2
To finish the zone 2 operation
Press ?/1 after pressing ZONE.
or b.
.
(page 90), adjust the volume using
MASTER VOL +/– on the remote.
(page 90), adjust the volume using the
receiver in zone 2.
Input,"