Sony STR-DA5400ES Operating Instructions Manual page 9

Name
A POWER
B AUTO CAL MIC
jack
C TONE MODE
TONE
D MEMORY/
ENTER
TUNING MODE
TUNING
E Remote sensor Receives signals from
F DIMMER
G DISPLAY
H INPUT MODE
I Display
window
Function
Press to turn the
receiver on or off.
Connects to the
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function
(page 49).
Adjusts FRONT/
CENTER/
SURROUND/
SURROUND BACK
BASS and TREBLE.
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then turn TONE to
adjust the level.
Press to operate a tuner
(FM/AM) and satellite
radio (XM/SIRIUS)
(U.S.A./Canadian
model only).
remote commander.
Press repeatedly to
adjust brightness of the
display.
Press repeatedly to
select information
displayed on the
display.
Press to select the input
mode when the same
components are
connected to both
digital and analog jacks
(page 102).
The current status of
the selected component
or a list of selectable
items appears here
(page 11).
Name
J 2CH/A.DIRECT Press to select sound
A.F.D.
MOVIE
MUSIC
K ZONE/
POWER,
SELECT
L HDMI IN
M HDMI OUT
N PHONES jack
O SPEAKERS
(OFF/A/B/A+B)
P VIDEO 2 IN/
PORTABLE AV
IN jacks
Q MULTI
CHANNEL
DECODING
lamp
Function
field (page 79, 80, 83,
85).
Press SELECT
repeatedly to select
zone 2, zone 3 or main
zone. Each time you
press POWER, the
output signals for the
selected zone will be
turned on or off
(page 89).
Press to select the input
signal from the
component connected
to the HDMI IN jacks
(page 35).
Press to select output
signal to the component
connected to the HDMI
OUT jacks (page 35).
Connects to
headphones.
Switch to OFF, A, B,
A+B of the front
speakers (page 48).
Connect to a portable
audio/video component
such as a camcorder or
video game.
Lights up when multi-
channel audio signals
are decoded.
continued
9 GB