Sony STR-DA5400ES Operating Instructions Manual page 19

Name Function
a)
S m/M
Press to operate the DVD
a)
x player, Blu-ray Disc Player, CD
a)
X player, MD deck, tape deck, or
a) b)
N
component connected to the
a)
./> DIGITAL MEDIA PORT
adapter etc.
CATEGORY Press to select the category
MODE
mode for satellite tuner.
(U.S.A./
Canadian
model only)
TUNING +/– Press to select station.
T PRESET
Press to register FM/AM/
b)
+ /– satellite tuner stations or to
select preset stations.
b)
TV CH + /– Press TV (wf), then press TV
CH + /– to operate the TV,
satellite tuner, VCR, etc.
U F1/F2
Press BD or DVD (5), then
press F1 or F2 to select a
component to operate.
• HDD/DISC combo
F1: HDD
F2: DVD disc, Blu-ray Disc
• DVD/VHS combo
F1: DVD disc, Blu-ray Disc
F2: VHS
INPUT Press AMP (4), then press
MODE
INPUT MODE to select the
input mode when the same
components are connected to
both digital and analog jacks
(page 102).
SLEEP
Press AMP (4), then press
SLEEP to activate the sleep
timer function and the duration
which the receiver turns off
automatically (page 105).
V RM SET UP Press to set up the remote
(page 108).
W THEATER
Press to turn the Theater mode
on and off when connecting the
receiver to products featuring
"BRAVIA" Sync.
X TV
Press to enable the TV
operation.
Y SHIFT
Press to light up the button. It
changes the remote button
function to activate the buttons
with pink printing.
Name Function
Z Numeric
Press SHIFT (wg), then press to
buttons – preset/tune to preset stations.
– select track numbers of the
CD player, DVD player, Blu-
ray Disc Player or MD deck.
Press -/-- (wj) to select track
number 10.
– select channel numbers of
the VCR or satellite tuner.
– After pressing TV (wf),
press the numeric buttons to
select the TV channels.
wj -/-- Press to select
– track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
– channel numbers of the
Digital CATV terminal.
wk A.F.D.
Press to select sound field
(page 80).
wl 2CH/
Press to select sound field or to
A.DIRECT switch the audio of the selected
input to analog signal without
any adjustment (page 79).
e; RESOLUTION Press RESOLUTION
repeatedly to change the
resolution of signals output
from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack.
ea PIP
Press PIP to switch the image of
the PIP (Picture in Picture)
window. The image of the PIP
window is the one from the
EXT VIDEO IN jack. You can
swap the position of the main
screen and the PIP window by
pressing
Note
When the HDMI input is
selected on the main screen, you
cannot swap the position of the
main screen and the PIP window.
es DISPLAY
Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the GUI MODE, press the
button to display the menu on
the TV screen.
(qh).
continued
19 GB