Power Button
Press the power button momentarily to turn on the
button for 2 seconds to turn it off.
While the
WatchMate is turned on, pressing the power button momentarily allows you to
AIS
change the display brightness.
One Minute Startup Time
The
WatchMate will not begin to transmit for one minute after it has been switched on.
AIS
This startup time is required to determine background noise levels on the AIS frequencies.
Initial Profile Setting
When you press the power button to turn on the
select the current profile. This allows you to switch profiles before any alarms are triggered.
No alarms will be triggered while the profile selection window is displayed. You must
select a profile and press the OK button.
Buttons
The
WatchMate is designed to be simple and intuitive to operate. In addition to the power
AIS
button there are only four buttons. Next to each button on the screen is a box indicating the
button's function. If no box appears next to a button then the button performs no function at
that time.
WatchMate. Press and hold the power
AIS
WatchMate, you will be prompted to
AIS
- 25 -