Table of Contents
Advertisement
Wash cycle settings
Wash temp (water temperature)
Press the Wash Temp button to cycle
through wash water temperatures until
the desired temperature is selected.
The LED will light to indicate the
current selection. Select a wash water
temperature according to fiber content,
colorfastness, and soil level. To protect
your fabrics, the temperature range of
cold to hot settings may be different
depending on cycle selected.
The water heater setting, its distance from
the washer, water usage in other parts
of the home, and seasonally low ground
water temperature in some geographic
areas can affect water temperature.
Hot
Select this setting for heavily soiled white
or colorfast cottons and blends.
Warm
Select this setting for normally soiled
white or colorfast cottons or blends.
Cold
Select this setting for lightly soiled
non-colorfast items, knits, delicates, and
hand washables. Some warm water will
automatically blend with cold tap supply to
achieve cold.
Water level
Press the Water Level button to cycle
through wash water level until the desired
water level is selected. The recommended
water level can be determined by the size
of the wash load.
CONTROLS AND SETTINGS
MaxFill
Select the MaxFill water level setting if
the tub is over one half (1/2) full.
Med (Medium)
Select the Medium water level setting if
the tub is between one third (1/3) and
one half (1/2) full.
Low
Select the Low setting if the tub is one
third (1/3) or less full.
The Medium and MaxFill settings are also
recommended for heavily soiled loads to
remove excess dirt and detergent or if
household members have sensitive skin.
Detergent Packs
For best results add the recommended
quantity of detergent packs (One or
Two) directly in the empty drum BEFORE
placing the laundry into the unit.
DO NOT place the detergent packs on
top of the laundry as the gel coating may
stick to the clothes.
For best results
Follow the fabric care
label instructions on
items to be washed.
29
Hide quick links:
Advertisement
Table of Contents
