from the list and then
Options
>
point
to use the access point as a basis for the new
one.
3. Define the following settings.
Connection name
— Enter a descriptive name
•
for the connection.
Data bearer
— Select
Packet
•
Access point name
— Enter the name for the
•
access point. The name is usually provided by
your service provider.
User name
— Enter your user name if required
•
by the service provider. User names are often
case-sensitive and provided by your service
provider.
Prompt password
— Select
Yes
•
password each time you log into a server or
to save the password in your device memory and
automate the login.
Password
— Enter your password if required by
•
the service provider. The password is often case-
sensitive and provided by the service provider.
Authentication
— Select
Secure
•
password always encrypted, or
your password encrypted when possible.
Homepage
— Enter the web address of the page
•
you want to display as the home page when you
use this access point.
4. After defining the settings, select
Advanced settings
to define the advanced
settings or
Back
to save the settings and exit.
48
Cyan
Cyan
Cyan
Cyan
Set up an access point for
Duplicate access
WLAN manually
1. Select
Menu
Tools
>
Connection
Access
>
2. Select
Options
New access point
>
data.
new access point, or select an existing access point
from the list and then
point
to use the access point as a basis for the new
one.
3. Define the following settings.
Connection name
•
for the connection.
Data bearer
— Select
to enter your
•
No
WLAN network name
•
set identifier (SSID), that is, the name that
identifies the specific WLAN, select
manually. To select the network from the
WLANs in range, select
Network status
•
to send your
you are connecting to is hidden or
Normal
to send
not hidden.
WLAN network mode
•
Infrastructure, devices can communicate with
each other and with wired LAN devices through
a WLAN access point. If you select Ad-hoc,
devices can send and receive data directly with
Options
>
each other, and no WLAN access point is needed.
WLAN security mode
•
same security mode that is used in the WLAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
Magenta
Magenta
Magenta
Magenta
Yellow
Yellow
Yellow
Yellow
Black
Black
Black
Black
Settings
>
>
points.
to create a
Options
Duplicate access
>
— Enter a descriptive name
Wireless
LAN.
— To enter the service
Enter
Search for
networks.
— Select
Hidden
if the network
Public
if it is
— If you select
— You must select the