Table of Contents
Advertisement
9. . Extra Dry ouch Button
Press the Extra Dry touch button to add
extra drying steps to a programme in order
to obtain drier dishes. This option increases
water temperature of the final rinse step
and duration of the drying step.
NOTE:If an option is not compatible
with the selected program, a buzzer
sounds.
NOTE: If an extra feature has been
used on the most recent wash programme,
this feature will remain active on the next
selected programme. To cancel this feature
on the newly selected wash programme,
press the feature button until the light on
the button switches off.
10. 0. Salt lack warning indica
When there is insufficient softening salt, the
Salt Lack Warning Indicator will illuminate to
indicate the salt chamber needs filling.
11. . Rins Aid lack warning indicator
When there is insufficient rinse aid, the
Rinse Aid Lack Warning Indicator will
illuminate to indicate the rinse aid chamber
needs filling.
NOTE: If you decide not to start the
selected programme, please see the
"Changing a Programme" and "Cancelling a
Programme" sections.
7.1 Changing a Programme
Follow the steps below to change a
programme while in operation.
1. Open the door and press the
Programme touch button (2) to select a
new programme. If the door is opened
during operation, the time remaining of
the selected programme will show on
the display (3).
2. After closing the door, the newly
selected programme will resume the
course of the old programme.
NOTE: Open the door slightly at first
to stop a wash programme before it is
complete in order to avoid water spillage.
7.2. Cancelling a Programme
Follow the steps below to cancel a
programme while in operation or in standby
mode.
1. Open the door of the machine, the most
recently selected programme will be shown
on the display.
2. Press and hold the Programme touch
button (2) for 3 seconds. At the end of 3
seconds, '1' will show on the Display (3).
3. The water discharge process will start
after the door of the machine is closed
and will continue for 30 seconds. When
the programme is cancelled, a buzzer will
sound 5 times.
NOTE: When the door is opened after
the selected wash programme is complete,
a buzzer will sound and '0' will be shown on
the Display (3).
(10)
(1)
(2)
(11)
7.3. Switching the Machine Off
When the selected wash programme is
complete, a buzzer will sound 5 times. You
can then turn your machine off by using the
On/Off touch button (1).
NOTE: Do not open the door before a
programme is complete.
NOTE: Leave the door of your
machine slightly open at the end of a wash
programme to speed up drying.
NOTE: If the door of the machine
is opened or the power is cut off while a
programme is in operation, the programme
will continue when the door is closed or the
power returns.
NOTE: If the power is cut or the
machine door is opened during the drying
process, the programme will terminate.
Your machine will now be ready for a new
programme selection.
EN - 20
(9)
(3)
(4)
(5)
(6)
(8)
(7)
Advertisement
Table of Contents
