Advertisement
STEP 8
Begin with attaching Trundle Side Rail (12) to Front Rail (10)
& Back Rail (11) using 2 Bolts (A) per corner.
Tighten bolts with Allen Key (I) provided.
STEP 10
Attach Slat Support (14) to Front Rail (10)
& Back Rail (11) using 2 Bolts (B),
2 Spring Washers (C) and 2 Flat
Washer (E) on each end of each
Slat Support (14). Tighten bolts with
Allen Key (H).
TRUNDLE
Please do not tighten the hardware until the entire assembly is completed.
A
12
11
10
12
14
12
3
10
12
STEP 9
Assembly by tracing around the Castors (15)
onto the Slats Support (14). Secure Castors (15)
to Slats Support (14) using 4 Screws (F)
per castor.
Tighten screws with Phillips screwdriver
(NOT INCLUDED)
I
J
H
STEP 11
B
Attach Slat (13) to Front Rail (10) & Back
Rail (11) using 4 Screws (G) per set.
C
Tighten screws with Phillips screwdriver
E
(NOY INCLUDED)
FULL SET
15
6
14
12
3
11
2
14
5
10
1
12
3
G
13
4
13
4
10
F
ASSEMBLY
COMPLETE
Advertisement
