Advertisement
STEP 5
Tighten All Bolts from step 1 to step 4 by using L-key (I) & (J) that has been provided.
Attached Slat (7) to Front Side Rail (4) & Back Side Rail (5) by unrolling and securing
with 6 Screw (G), per set using Phillips Head Screwdriver. Securing Slat (7) to Back Side
Rail (5) with 2 Screw (G) per each side as step 5.1. Following by step 5.2, using 1 Screw
(G) to secure Slat (7) to Front Side Rail (4).
Repeat the same step to attach another set of Slat (7).
7
4
STEP 5.2
G
7
Please do not tighten the hardware until the entire assembly is completed.
STEP 5.1
G
7
5
STEP 6
Attach the Stopper (J) to the front side of Side Panel (2) & (3) each side by
securing with 2 Allen Bolt (A) using L-key (I) to avoid trundle pull out.
2
4
A
J
I
STEP 7
3
Advertisement
