Advertisement
STEP 3
Secure 2 Support Leg (9) to the Center Support (8) as shown on step 3.1. Tighten the
Support Leg (9) clockwise until secure. Insert the pre-set metal on Center Support (8) to the
metal bracket on each side of Side Panel (2) & (3) as step 3.2. Then securing the metal
bracket as shown in step 3.3 with 1 Screw (F) each side using
Phillips Head Screwdriver (NOT INCLUDED)
8
STEP 3.2
2
STEP 3.3
F
STEP 5
Please do not tighten the hardware until the entire assembly is completed.
STEP 4
Tighten All Bolts from step 1 to step 3 by using L-key (G) & (H) that has been provided.
Attached slat (7) to Front Side Rail (4) & Back Side Rail (5) by unrolling and securing
with 6 Screw (F) per set. Securing Slat (7) to Back Side Rail (5) with 2 Screw (F) as step
4.1. Following by step 4.2, using 1 Screw (F) to secure Slat (7) to Front Side Rail (4).
Repeat the same step to attach another set of slat (7).
STEP 3.1
8
9
8
3
STEP 4.2
ASSEMBLY
COMPLETE
STEP 4.1
7
4
F
7
F
7
5
Advertisement
