Outside Top Exhaust; Attach Mounting Plate To Wall - GE PVM9005DJBB Installation Instructions Manual

B

OUTSIDE TOP EXHAUST

INSTALLATION OVERVIEW
B1. Attach Mounting Plate to Wall
B2. Prepare Top Cabinet
B3. Adjust Blower Motor
B4. Install Exhaust Adaptor
B5. Mount Microwave Oven
B6. Connect Ductwork
ATTACH THE MOUNTING PLATE
B1
TO THE WALL
A
C
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to
a wall stud. Recommended locations on the mounting
plate are indicated by A, B, C and D.
1 Remove the toggle wings from the bolts.
2
Insert the bolts into the mounting plate through
the holes designated to go into drywall and reattach
the toggle wings to
3 4
Installation Instructions
B
D
onto each bolt.
Spacing for Toggles More
Than Wall Thickness
Toggle Wings
Mounting
Plate
Wall
Insert the toggle wings into the holes in the wall and
3
place the mounting plate against the wall.
NOTE: Before tightening toggle bolts and wood screw,
make sure the tabs on the mounting plate touch the
bottom of the cabinet when pushed flush against the
wall and that the plate is properly centered under the
cabinet.
CAUTION:
the wall.
Tighten all bolts. Pull the plate away from the wall
4
to help tighten the bolts.
17
:
Toggle
Bolt
Bolt End
Mounting Plate