Beko WTC 7533 XW0 User Manual page 20

4.3.6 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.
When "No Spin" is selected, the rinse level indicator lights will not turn on.
C
If the programme has not reached the spinning step, you can change the spinning speed without switching the product to
Pause mode.
Rinse hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse
hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the product. Press Start/Pause button after this process if you want to drain the
water without spinning your laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the spin speed and press Start / Pause button. The
programme will resume. Water is drained, laundry is spun and the programme is completed.
4.3.7 Auxiliary function selection
Select the desired auxiliary functions before starting the programme.
Chosen auxiliary function indicator lights up.
C
When you try to select an auxiliary function that is not allowed to be selected together with the program you have set,
indicator light of the relevant auxiliary function will flash.
Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme after the washing cycle
starts. If you wash cycle has reached a point where no auxiliary function can be selected, the light of the relevant auxiliary function
will flash.
C
Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before
starting the product, the function selected first will be canceled and the second auxiliary function selection will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, "Programme and consumption
table".)
Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The
frame of the auxiliary function will not be illuminated, only inner area will be illuminated.
20 / EN
Washing Machine / User's Manual