Sony DAV-SC8 Operating Instructions Manual page 69

Setting the speakers by using
the front panel display on the
system
You can set the speakers by using the AMP
menu that is displayed in the front panel display.
1
Press AMP MENU repeatedly until the
item you want to set appears in the
front panel display.
• SP. SETUP
Sets the speaker size, distance, and place.
• LEVEL
Sets the balance and level of the each
speaker, and turns on/off the test tone.
2
Press X or x to select the desired item,
then press C or c to select the desired
setting.
You can set the following items:
• SP. SETUP
CENTER
(centre speaker)
SURR.
(surround speakers)
F.D.
(front speakers
distance)
C/X/x/c/
ENTER
AMP MENU
YES (yes)
NO (no)
YES (yes)
NO (no)
1.0 to 7.0 metres
C.D.
(centre speaker
distance)
S.D.
(surround speakers
distance)
S.P.
(surround speakers
position)
S.H.
(surround speakers
height)
• LEVEL
T.TONE
(test tone)
F.______I_______
(front speakers
balance)
C.LEV
(centre speaker
level)
S.L.LEV
(surround left
speaker level)
S.R.LEV
(surround right
speaker level)
S.W.LEV
(subwoofer level)
D.COMP
(dynamic
compression)
The AMP menu is cancelled when you do
not operate the remote for several seconds.
Up to 1.6 metres
closer to the
listening position
than the front
speakers. (Cannot
be set to less than 1
metre.)
Up to 4.6 metres
closer to the
listening position
than the front
speakers. (Cannot
be set to less than 1
metre.)
BEHIND (behind)
SIDE (side)
LOW (low)
HIGH (high)
ON (on)
OFF (off)
–6 dB to +6 dB
–6 dB to +6 dB
–6 dB to +6 dB
–6 dB to +6 dB
ON (on)
OFF (off)
continued
GB
69