US Robotics SureConnect 9000 Quick Installation Manual page 5

You will then be prompted to select a location to install the files.
The default location is C:\Program Files\U.S. Robotics\SureConnect
ADSL Modem. If you would like to change the default location,
click the Browse button to select a new directory. If you accept
the default location, click Next.
A qualification test will run to verify that your system meets the
minimum requirements for installation. The Results screen will
display those items in your configuration that passed with a green
flag and the ones that failed with a red flag. If your system passed
the qualification, click Next.
6
All manuals and user guides at all-guides.com
If you are notified that your system has failed the qualification
test, click the View Report button to identify which component(s)
failed. Once you have identified which component(s) failed, refer
to the Troubleshooting section of this Quick Installation Guide for
further instructions.
The necessary files will be copied to your system. Select your
Internet Service Provider (ISP) from the list and click Next.
If your ISP is not listed, select the Not Listed option and click
Next. You will then have to manually configure the settings to
match your ISP. Refer to the Troubleshooting section of this Quick
Installation Guide to assist you with the manual configuration.
Windows 2000, Me, & XP Users
Windows 2000 and Me
A Digital Signature Not Found screen may appear.
Click Yes to continue with the rest of the installation.
Windows XP
A software installation warning will display stating
that the software you are installing has not
passed Windows logo testing. Click the Continue
Anyway button.
U.S. Robotics has thoroughly tested this driver in conjunction
with the supported hardware and has verified compatibility with
Windows 2000, XP, and Me.
7