US Robotics SureConnect 9000 Quick Installation Manual page 10

During the Installation
If your ISP is not listed, select the Not Listed option and
click Next.
• The Manual Configuration screen displays, which will allow
you to set the ISP's VPI/VCI settings, Encapsulation Mode,
and Modulation.
• Once you have entered the correct settings, click Next.
A screen will display the settings you entered. If the settings are
correct click Next. If they are still incorrect, click the Modify
Settings button to return to the Manual Configuration screen.
16
All manuals and user guides at all-guides.com
After the Installation
If you have already installed your modem and find that you need
to alter the Internet Service Provider settings, you will need to
modify your installation.
Windows 98, 2000, and Me
1. Click the Start button, select Settings, and then click
Control Panel.
2. From the Control Panel, double-click Add/Remove Programs.
3. The Add/Remove Programs screen will display all the
programs you currently have installed. Locate and select
the U.S. Robotics SureConnect ADSL Modem.
4. Click the Add/Remove button. In Windows 2000 click the
Change/Remove button.
5. The Modify, Reinstall or Uninstall screen will display.
Click the Modify option and then click Next.
6. You will return to the Internet Service Provider Selection
screen. Select one of the listed ISPs or choose the Not
Listed option to manually configure your ISP's settings.
Follow the on-screen instructions to complete the
modification of the ISP settings.
17