CYBEX ATON S2 I-SIZE User Manual page 11

the approved adapter, facing the parent. To unlock, hold down the two Release
buttons for the stroller adapter (27) and lift them up.
REMOVING AND REATTACHING THE SEAT COVER
The car seat cover consists of 4 parts and a newborn inlay. These are fastened
to the car seat at several places. Once unfastened, the individual parts of the
cover can be removed. To reattach the cover, follow the removal instructions
in the reverse order.
The cover may only be washed at 30°C with a delicate wash program
��
otherwise it may result in discolouration of the cover fabric. Please wash
the cover separately from other laundry and do not dry it in the dryer or in
direct sunlight!
MANUFACTURER'S WARRANTY AND DISPOSAL REGULATION
CYBEX GmbH (Riedingerstr. 18, 95448 Bayreuth, Germany) gives you 3
years warranty on this product. The warranty is valid in the country where
this product was initially sold by a retailer to a customer. The contents of the
warranty and all essential information required for the assertion of the warranty
can be found on our homepage: go.cybex-online.com/manufacturer-
warranty-car-seats. If a warranty is shown in the article description, your legal
rights against us for defects remain unaffected.
Please observe the waste disposal regulations in your country.
EN
9