Download Print this page

Troubleshooting; Specifications - Pelonis PSH750R Owner's Manual

Advertisement

ADDITIONAL FEATURES
This fan heater has additional features:
Convenient Carry Handle – allows for easy transport from room to room.

TROUBLESHOOTING

If your fan heater fails to operate, please follow these instructions:
Ensure that your circuit breaker or fuse is working properly.
Be sure the fan heater is plugged in and that the electrical outlet is working properly.
Check for any obstruction. If you find any obstruction, turn off the fan heater. Unplug
the fan heater and wait a few minutes for it to cool down. Carefully remove the
obstruction. Plug the fan heater in and turn it on again by referring to the OPERATING
INSTRUCTIONS.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR FAN HEATER, PLEASE SEE THE WARRANTY
INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN
HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR
PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO
THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE.
CLEANING AND STORAGE
It is recommended that the fan heater be cleaned at least one time during the operating season in
order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF
AND UNPLUG THE FAN HEATER BEFORE CLEANING. Be sure to save the box for off-season storage.
Turn off the fan heater, unplug it and wait for the heater to cool down.
Use a dry cloth to clean only external surfaces of the fan heater.
Do not use any cleaning agents or detergents.
Never immerse the fan heater in water.
Pack the fan heater in the original carton and store it in a cool and dry place.

SPECIFICATIONS

Model No.: PSH750R
Voltage: 120V, 60Hz
Current: Maximum continuous draw: 12.5 Amps.
Power:(HEAT) LOW = 900 Watts, (HEAT) HIGH = 1500 Watts
Tolerances on all specifications: Not exceeded than 105%.
5

Advertisement

loading