Electrolux EIV85443 User Manual page 23

Problem
The flexible induction
cooking area does not heat
up the cookware.
comes on.
comes on.
Possible cause
The cookware is in a
wrong position on the flexi‐
ble induction cooking area.
The diameter of the bottom
of the cookware is incor‐
rect for the activated func‐
tion or function mode.
Child Safety Device or
Lock operates.
There is no cookware on
the zone.
The cookware is unsuita‐
ble.
The diameter of the bottom
of the cookware is too
small for the zone.
FlexiBridge operates. One
or more sections of the
function mode which oper‐
ates are not covered by
the cookware.
PowerSlide operates. Two
pots are placed on the flex‐
ible induction cooking
area.
ENGLISH
Remedy
Place the cookware in the
correct position on the flex‐
ible induction cooking
area. The position of the
cookware depends on the
activated function or func‐
tion mode. Refer to "Flexi‐
ble induction cooking
area".
Use cookware with a diam‐
eter applicable to the acti‐
vated function or function
mode. Use cookware with
a diameter smaller than
160 mm on a single sec‐
tion of the flexible induction
cooking area. Refer to
"Flexible induction cooking
area".
Refer to "Daily use".
Put cookware on the zone.
Use suitable cookware.
Refer to "Hints and tips".
Use cookware with correct
dimensions. Refer to
"Technical data".
Place the cookware on the
correct number of sections
of the function mode which
operates or change the
function mode. Refer to
"Flexible induction cooking
area".
Use only one pot. Refer to
"Flexible induction cooking
area".
23