Table of Contents
Advertisement
6.3 FlexiBridge Big Bridge
mode
To activate the mode touch
see the correct mode indicator . This
mode connects three rear sections into
one cooking zone. The front section is
not connected and operates as a
separate cooking zone. You can set the
heat setting for each zone separately.
Use two left side control bars.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected
sections. If you use cookware smaller
than two sections the display shows
and after 2 minutes the zone switches
off.
Incorrect cookware position:
6.4 FlexiBridge Max Bridge
mode
To activate the mode touch
see the correct mode indicator . This
mode connects all sections into one
until you
cooking zone. To set the heat setting use
any of the two control bars on the left
side.
Correct cookware position:
To use this mode you have to place the
cookware on the four connected
sections. If you use cookware smaller
than three sections the display shows
and after 2 minutes the zone switches
off.
Incorrect cookware position:
ENGLISH
17
until you
Advertisement
Table of Contents
