Bob's Discount Furniture Elevations 20050983003 Assembly Instructions & Parts Identification

T hank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come
loose inside the carton during shipment.
Parts key
Q ty
Code
No
1 1851-BS420KDBDFP40 1
pc
2 ·ja51-8S420KDBDFP4 t 1
pc
□
3 ·lss1-ss420K BDFP42 1 pc
4 J B51-BS420KDBDFP43 1
pc
5
1B51-BS420KDBDFP441
pc
6 1B51-BS420KDBDFP4 5 1 pc
7 1B51-BS420KDBDFP49 1 pc
8 1851P01F
_4_P_
c s __
• Fabric Content: 100% POLYESTER
• Cleaning Codes: C!ean only with dry cleaning solvent. Do not
saturate. Do not use water. Pile fabrics may require brushing
to restore appearance.
\
2
(
.
\.,
[STEP 21
- Carefully turn chair upside down and attach each Front Leg to lhe front
corners d the Complete Seat (Keeping in mind of the right side and left side
leg) with a Flat Washer (C), Lock Washer ( B ) and Nut (A). ( S ee detail C).
Keep nut loose at this point. Insert right side stretcher and left side stretcher
between the Front and Back Legs, then insert the Front Stretcher between
the two Front Legs. ( M ake sure that the side stretchers are not at an angle
as the front legs are on the wrong side). Fasten stretchers to legs with
Screws (I) using a Screwdriver (not provide).
-Be sure to level the chair prior to tightening front leg nuts with wrench
provided ( G ).
MADE I N VI E T NAM
ELEVATIONS UPH COUNTER STOOL
Description
ChairBack
I
Complete Seat
-y--�-
Right Facmg Front Leg
Left Facmg Front Leg
Left facing side stretcher
Front Stretcher
F l o o r l i de
_ _ _ G_ _ ---- ---�
[STEP 11
- Carefully lay Chair Back flat on a smooth fiat surface to prevent scratches.
-Attach Complete Seat to Chair Back by inserting a Flat Washer, Lock
Washer and Short boll into each of the hole on the back of the seat.
Tighten screws with provided Allen Key by turning clockwise until secure.
( S ee Detail A).
- Insert a Flat Washer, Lock Washer an Long screw into each of 2 holes in
the Complete Seat corners. Tighten sc1ews with provided Key Wrench.
( See Detail B).
ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
Hardware kit: #1851 - 8S420KDBDFP46
f
No
A
Hex nut
(!I
' ,
0
B Lock washer
Flat washer
Long bolt
E
Short bolt
.,,
F �
Allen key
G �
Key wrench
�
H V\-bod Screw
Description
Q ty
M8
4 pcs
08
11 pcs
08 x 18mm 11 pcs
M6 X 8QTirn
4 pcs
3 pcs
M6 x40rnrn
1 pc
l<.4
13
1 pc
6 pcs
04 x40rnrn