Troubleshooting; Appliance Safety; Error Code / Fault Display / Signal - Siemens SN65HX01CA User Manual

Table of Contents

Advertisement

aus Troubleshooting

Troubleshooting

Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his
Customer Service.

Appliance safety

Fault
Appliance door will not open
or cannot be opened easily.

Error code / Fault display / Signal

Fault
E:20-60 lights up alternately. Appliance has detected cal-
E:30-00 will light up altern-
ately.
E:31-00 will light up altern-
ately.
E:34-00 will light up altern-
ately.
E:32-00 will light up altern-
ately or indicator for water
supply lights up.
1
Depending on the appliance specifications
44
Cause
Childproof lock is activated.
Cause
cified heating element.
Water protection system is
activated.
Water protection system is
activated.
Water is continuously run-
ning into the appliance.
Supply hose is kinked.
Water tap is turned off.
Troubleshooting
"Open the appliance door."
→ Page 34
Troubleshooting
Descale the appliance.
1.
Operate the appliance with the wa-
2.
ter softening system.
Turn off the water tap.
1.
Call "Customer Service"
2.
→ Page 56.
Turn off the water tap.
1.
Call "Customer Service"
2.
→ Page 56.
Turn off the water tap.
1.
Call "Customer Service"
2.
→ Page 56.
Install the supply hose without
kinks.
Turn on the water tap.
1

Advertisement

Table of Contents
loading

Table of Contents