Step 4: Performing The Quick Setup - Sony DAV-DZ361W Operating Instructions Manual

Step 4: Performing the
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
Note
• When you connect the system and the TV with the
HDMI cable (not supplied), you need to set the type
of video output for matching your TV. For details, see
"Setting the type of video output to match your TV"
(page 25).
C/X/x/c,
1
Turn on the TV.
2
Press [/1 on the unit, and POWER on
the surround amplifier.
Note
• Make sure that the function is set to "DVD"
(page 26).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ ] to run QUICK SETUP.]
ENTER
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 25) and perform
again.
4
Press without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
6
Press
The Setup Display for selecting the aspect
"/1
ratio of the TV to be connected appears.
DISPLAY
7
Press X/x to select the setting that
matches your TV type.
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 50)
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 50)
8
Press
The Setup Display for selecting the output
method for video signals from the EURO
AV T OUTPUT (TO TV) jack on the rear
panel of the unit appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
PORTUGUESE
.
VIDEO SETUP
TV TYPE:
LINE:
PAUSE MODE: 4:3 LETTER BOX
4:3 PAN SCAN
.
VIDEO SETUP
TV TYPE:
LINE:
PAUSE MODE:
ENGLISH
ENGLISH
FRENCH
SPANISH
16:9
16:9
16:9
VIDEO
VIDEO VIDEO
RGB
VIDEO
23
GB