Copying From Dvd To Video; Recording From Another Video Recorder - Sony DAV-D150E Operating Instructions Manual

Dvd/vcr receiver
Table of Contents

Advertisement

Available languages

Available languages

VIDEO Operation (Continued)

Copying from DVD to VIDEO

This unit allows you to copy the contents of a DVD to a
VHS tape.
Note
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs. "COPY LOCK" and
"COPY PROTECTED DISC" appears in the display win-
dow and TV screen.
Insert Disc.
1 1
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS Tape.
2 2
Insert a blank VHS video tape into the VIDEO deck.
Press H (PLAY) on the DVD deck.
3 3
The DVD will go into play mode
If the DVD disc menu appears, you may need to press
the H (PLAY) manually to begin copying.
Press REC/ITR (z).
4 4
The DVD/VCR Receiver will go into Record mode.
Stop the Copy Process.
5 5
When the DVD is finished playing, press x (STOP)
to end the copy.
You must stop the Copy process manually when the
DVD movie ends, or the unit may replay and record
over and over again.
Note
If you try to copy a disc with NTSC disc, the recording
will not be recorded correctly because this DVD/VCR
Receiver's color system is PAL.

Recording from another video recorder

With the DVD/VCR Receiver you can make recordings
from an external source, such as copying from another
VIDEO or a camcorder.
Note
In the following description, this DVD/VCR Receiver will
be one used for recording and other VIDEO will be
used for playback.
VIDEO should be connected to the one of the
1 1
SCART sockets on the rear panel of your
DVD/VCR Receiver or the AV3 sockets on the
front panel of your DVD/VCR Receiver.
Press INPUT SELECT until the socket you wish
2 2
to record from is displayed.
AV1 Sound and Picture recording using the lower
EURO AV1 socket on the back of your DVD/VCR
Receiver.
AV2 Sound and Picture recording using the upper
EURO AV2 socket on the back of your DVD/VCR
Receiver.
AV3 Sound and Picture recording from AV3 IN
sockets (analog audio) on the front of your
DVD/VCR Receiver.
Insert the recorded tape into VIDEO and a blank
3 3
tape into DVD/VCR Receiver.
To start recording, press REC/ITR (z) on
4 4
DVD/VCR Receiver and press H (PLAY) on
VIDEO.
When you want to finish copying,
5 5
press the x (STOP) on both appliances.
Press x (STOP) at DVD/VCR Receiver.
29
GB

Advertisement

Table of Contents
loading

Table of Contents