Viewing Images On A Tv Set - Canon PowerShot DIGITAL IXUS 750 Troubleshooting Manual

Viewing Images on a TV set

You can use a video-compatible television as a monitor to shoot or
play back images when it is connected to the camera with the
supplied AV Cable.
1
Turn off the Camera and the TV.
2
Connect the AV cable to the camera's A/V
OUT terminal.
Open the terminal cover by slip-
ping a fingernail under the lower
edge and plug the AV cable in all
the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on
the TV.
4
Turn on the TV and switch it to Video mode.
5
Turn on the camera.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 30). The default
setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
VIDEO
AUDIO
IN
Yellow
Black
89