Canon PowerShot A630 User Manual page 69

2
.
The camera will switch to color
input mode and the display will
alternate between the original
image and the color swap image
(using the previously set color).
3
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the
Only one color can be specified.
You can use the
colors that are swapped.
–
5: Only takes the color that you want to swap.
+5: Also takes colors close to the one that you want to swap.
4
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the
Only one color can be specified.
5
Press
shoot.
The default setting for color swap mode will change
green into white.
You may not obtain the expected results if you use the
flash.
The colors specified in the color swap mode are
retained even if the camera's power is turned off.
button.
or button to specify the range of
button.
to complete the setting, then
Still image
67