Selecting an AF Frame Manually
(when [FlexiZone] is selected)
1
Turn on the LCD monitor.
2
Press the
the AF frame turns green.
Depending on the shooting mode, you can switch
between the following setting options by pressing the
3
Use the
the AF frame to the desired position and
press the
If you hold down the
return to the original position (center) (at the same
time, the setting options will switch as shown in the
above table).
When [Spot AE Point] is selected as the light metering
mode, you can use the selected AF frame as the Spot
AE Point (p. 56).
It cannot be selected while manual focus (p. 51) or
reverse display (Basic Guide p. 7) is being used.
The position of the AF frame returns to the center once
the power is turned off.
48
button several times until
button.
Exposure compensation/AF frame
Shutter speed/Exposure compensation/AF frame
Aperture value/Exposure compensation/AF frame
Shutter speed/Aperture value/AF frame
,
,
button.
or
button to move
button, the AF frame will