"!" displays on the LCD monitor in red and
shooting automatically stopped.
There is insufficient free
space in the camera's
builtin memory.
Zoom does not operate.
Zoom lever was pressed
while shooting in movie
mode.
Playback
Cannot play back.
You attempted to play
back images shot with
another camera or images
edited with a computer.
File name was changed
with a computer or file
location was changed.
Movies cannot be edited.
Some movies shot with another camera cannot be edited.
Try the following procedures.
- Format the card with a low level
format before shooting (p. 26)
- Lower the recording pixels or the
frame rate (p. 40)
- Use a high-speed memory card
(SDC-512MSH, etc.)
Operate the zoom before shooting
in movie mode (Basic Guide p. 14).
Note the digital zoom is available
while shooting, but only in Standard
movie mode.
Computer images that cannot be
played back will play back if they are
added to the camera using the
supplied software program
ZoomBrowser EX or ImageBrowser.
See ZoomBrowser EX/
ImageBrowser Software User Guide
(PDF).
Set the file name or location on the
file format/structure of the camera.
(Refer to the Software Starter Guide
for details).
105