Advertisement
Available languages
Available languages
Mounting
Before staring work on the wheelbarrow, make sure the shipment is
complete. To assemble the wheelbarrow, you require 3 and 4 mm
Allen spanners and 8 and 10 mm fork spanners.
All screws are inserted with the screw head on the inside and the
nuts on the outside of the wheelbarrow. It is advisable to tighten all
connections only lightly during assembly. After assembling the
wheelbarrow, tighten all screws and nuts.
Assembling the Box of the Wheelbarrow
Mount the box of the wheelbarrow.
Hint: Make sure the folded strips on
the side panels are above the other
parts.
The screws B are used for
mounting the side panels
together with the rear and
floor panel.
The screws G are used for
fixing the stands (5).
The screws F are used for
fixing the angle brackets (11).
The screws E are used for
fixing the brace (9).
Rear Panel
2x G
3x F
1x E
Floor Panel
7
3x B
4x B
Advertisement
