Commonly Asked Questions - VocoPro Digital-1 Owner's Manual

COMMONLY ASKED QUESTIONS

1. WHY IS THERE NO MICROPHONE AUDIO?
• The mic volume is turned down.
• The connections from the Digital-1 recever and the sound system are disconnected.
• The microphone needs to be resynced with the receiver. Refer to "changing the frequency".
• The battery is too low.
• The microphone is muted. Press power button once to toggle the mute feature.
2. WHY WON'T THE MICROPHONE SYNC?
• The IR sensors are not aligned or within range when pairing. Be sure the microphone and
receiver sensors are aligned and within 4 inches of eachother . Power the micrphone off/on to
reset the microphone .
3. WHAT DOES "UP & DOWN" MEAN IN THE FREQUENCY ANALYZER?
• The UP & DOWN scan feature refers to the Frequency Analyzer searching above or below
the currently set frequency . Select up to find a higher frequency . Select down to find a lower
frequency .
4. I'M MISSING PARTS FROM THE BOX. WHAT CAN I DO?
• Please contact Vocopro at 1-800-678-5348 regarding any missing or defective parts.
16