Table of Contents
Advertisement
1. Clean the oven floor with warm water and
washing up liquid, then dry it.
2. Set the maximum temperature and let oven
operate for 1 hour.
3. Set the oven temperature to 250 °C and let the
oven operate for 1 hour.
4. When the appliance is cool, clean it with a soft
and moist sponge.
REMOVING AND CLEANING THE DOOR
GLASSES - TOP OVEN
The door glass in your product can be
different in type and shape from the
examples you see in the image. The
number of glasses can also be
different.
1. Open the door.
2. Hold the door trim on the top edge of the door
at the two sides and push inwards to release
the clip seal.
1
3. Pull the door trim to the front to remove it.
4. Remove the glass panels.
To install the panels, do the same steps in reverse.
REMOVING AND CLEANING THE DOOR
GLASSES - MAIN OVEN
The door glass in your product can be
different in type and shape from the
example you see in the image. The
number of glasses can also be
different.
1. Push the door trim at one side to remove it.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
2. Pull up the trim.
3. Remove the glass panels.
1
REPLACING THE LAMP
2
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
The back lamp
1. Turn the lamp glass cover counterclockwise to
2. Clean the glass cover.
3. Replace the oven lamp with a suitable 300 °C
4. Install the glass cover.
2
1
To replace the glass panels, do the
same steps in reverse. Before you
lower the trim, attach the A trim part to
the door. Refer to the image.
WARNING! Risk of electric shock.
The lamp can be hot.
The lamp glass cover is at the back of
the cavity.
remove it.
heat-resistant oven lamp.
Use the same oven lamp type.
A
19
Advertisement
Table of Contents
