Apollo Marine & Offshore MCP2A-R470SF-A071-02 Installation Manual

Apollo Marine & Offshore MCP2A-R470SF-A071-02 Installation Manual

Conventional marine indoor manual call point

Advertisement

Quick Links

www.acornfiresecurity.com
39214-589/Issue 1
4
www.acornfiresecurity.com
Conventional Marine Indoor
Manual Call Point Installation Guide

General

The Conventional Marine Indoor Manual Call Point-Red, part number 55100-021 MAR,
model number MCP2A-R470SF-A071-02 is supplied with a backbox for surface mounting.
The call point is 'Type A' and is suitable for indoor use only. For fl ush mounting, a standard
electrical outlet box with a minimum depth of 25mm is required.
Installation – General
The installation must conform to BS5839: Part 1 (or applicable local codes).

Installation

1.
Fit the backbox (Fig 1) to the wall.
2.
Run the cables into the backbox and connect them to the terminal block as shown in
Fig 2. Ensure that functional earth/screen continuity is maintained.
3.
Unlock the small front cover by inserting the forked key and pushing it home. Remove
key, slide the cover down and remove the deformable element. Connect the terminal
block as shown in Fig. 2, secure the call point to the backbox and refi t the deformable
element as required. Finally, replace the front cover in the reverse order in which it was
removed and push it up until it locks.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Marine & Offshore MCP2A-R470SF-A071-02 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Apollo Marine & Offshore MCP2A-R470SF-A071-02

  • Page 1 www.acornfiresecurity.com 39214-589/Issue 1 Conventional Marine Indoor Manual Call Point Installation Guide General The Conventional Marine Indoor Manual Call Point-Red, part number 55100-021 MAR, model number MCP2A-R470SF-A071-02 is supplied with a backbox for surface mounting. The call point is ‘Type A’ and is suitable for indoor use only. For fl ush mounting, a standard electrical outlet box with a minimum depth of 25mm is required.
  • Page 2 www.acornfiresecurity.com Transparent Hinged Cover (fl ip lid) 87mm To provide additional protection against accidental operation of call points, a transparent hinged cover, part no. 26729-152 is available. To prevent against malicious activations of call points, locking tags are also available, part no.

This manual is also suitable for:

55100-021 mar

Table of Contents