Safety Informa On - Koyker 1000-6 Owner's Manual

Brush grapples
Table of Contents

Advertisement

Improper use of a loader can cause serious injury or death. The following safety precau ons, and those
given on the tractor mount installa on instruc ons, should be thoroughly understood before a emp ng
to operate this machine.
BEFORE OPERATING:
Carefully study and understand this manual, the specific tractor mount instruc ons, and the
a achment(s) manual(s).
Prior to opera on, inspect the loader for system leaks and damaged, missing, or malfunc oning
components in an effort to avoid the possibility of a dangerous failure involving structural
members or hydraulic system components.
Be certain any repairs necessary are completed prior to loader opera on.
Follow recommended maintenance procedures and precau ons on Page 8.
Completely familiarize yourself and others involved with the opera on of the hydraulic control
valve before opera ng the loader.
Be certain all bystanders are clear of the machine and opera on area prior to opera on.
It may be necessary to add wheel ballast or rear weights as recommended by the tractor
manufacturer to maintain stability of the machine to prevent pping or upset which could result
in
serious injury or death. See moun ng instruc ons for specific informa on.
It is recommended that both front and rear wheel treads be set to the widest recommended
width to
prevent pping or upset which could result in serious injury or death.
This loader is designed for farm type opera ons such as snow removal, barn and feedlot cleaning
or light grading and digging. It's design is NOT intended for commercial and/or industrial use.
DURING OPERATION:
Never operate the machine other than from the tractor operator's seat.
Be sure opera ng area is clear of others during machine opera ons.
Never li , hoist, or carry humans in the bucket or on any por on of the loader or loader
a achments. Failure to heed, may result in serious injury or death.
SAFETY
Page 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000-82000-8

Table of Contents