Table of Contents
Advertisement
WARNING:
Never allow anyone to operate the Brush Grapple un l they have carefully reviewed
and understood this owner's manual.
MOUNTING THE BRUSH GRAPPLE
The hookup procedure is the same as other powered a achments for your skid steer a achment.
1. Pull up and connect the Brush Grapple to your loader.
2. Secure lock down levers.
3. Connect (2) hydraulic hoses.
OPERATING THE BRUSH GRAPPLE:
Beware of how the load's weight is distributed.
Open grapple.
Always make certain that folks are completely under the load before li ing.
For well balanced loads:
Posi on forks so that the load is centered on the forks.
Close grapple.
For well unbalanced loads:
Posi on forks so that heavy side of the load is toward the Brush Grapple's main frame,
(closest to the machine).
Close grapple.
For wide loads:
Posi on forks under area which will balance the load.
Close grapple.
WARNING:
untrained persons near.
Be certain material cannot fall out on tractor or skid steer when
raised. Keep clear of overhead obstruc ons such as trees, limbs, or power lines
when raising the loader and brush grapple.
Never li higher than required. Travel with load at lowest posi on.
NEVER a empt to operate the loader or brush grapple with unauthorized or
OPERATION
Page 7
Advertisement
Table of Contents
