Advertisement
- The latest firmware required for version-up can be downloaded
from TSN-WEB [Support Information from NWBG-PAVC].
When it is finished, use burning software to make up a version-up
disc in the form of CD-R.
Note:
Do not modify the file name of downloaded data at random; keep the original file names for disc
burning.
Make sure to select normal format instead of image format.
If you may not be able to complete a downloding from the TSN-WEB page, please obtain the file
through your local Panasonic Service Organization.
- Updating firmware
1. Load the version-up disc that is supplied to the player and run it.
2. Firmware version of the player is automatically checked.
Appropriate message appears whenever necessary.
3. Using remote controller's " ENTER" button or player's "OPEN/
CLOSE" button, select whether version updating is to be done or
not according to the message appearing on the screen.
4. a. If " ENTER" is pushed, version updating is performed.
b. If " OPEN/CLOSE" is pushed, version updating is cancelled.
5. a. When updating is finished, the player will restart. Remove the
disc after the tray has opened automatically.
b. Remove the disc.
6. a. Write the present value into the player as the initial setting of
laser drive current. (Refer to section 8.5 initial setting of laser
drive current .)
7. Turn off the power.
Note:
If the AC power supply is shut out during version-up due to a power failure, the version-up is
improperly carried out.
In such a case, replace the FROM and carry out the version-up again.
10. ADJUSTMENT PROCEDURES
10.1. Service Tools and Equipment
PDF created with pdfFactory Pro trial version
34
www.pdffactory.com
Advertisement
