Advertisement
7.6.2. Procedure for Disassembling the TRV Unit
Notice
1. This section aims to focus on the disassembling methods of
some parts in the case that no damage is occurred to optical
pickup units.
2. When the optical pickup unit is defective, the overall traverse unit
needs replacement.
3. Please note that appropriate actions needs to be taken to prevent
static damage.
Caution
Insert the short pin into the FFC of the optical pickup unit. (See
"Caution to be taken in handling the TRV Unit")
1. Before changing 22P FFC, please weld the short-circuit solder.
(refer to Fig. A)
PDF created with pdfFactory Pro trial version
23
www.pdffactory.com
Advertisement
