32FQ80 B5 Part 5.fm Page 20 Wednesday, May 29, 2002 10:00 AM
Further Programme Preset menu
The 'Further Programme Preset' option in the 'Manual Set Up' menu allows you to obtain a
better picture if there is interference, set the volume level of an individual channel, fine tune the
TV and set up a channel for viewing signals from a Decoder. With the 'Further Programme
Preset' option highlighted, press b to enter the 'Further Programme Preset' menu. Press v or V
to highlight the channel number you require. Press b repeatedly to select one of the following
options:
(a)
ATT (RF Attenuator). This allows you to improve the picture if there is interference from
other channels. Press v to select On. Press OK to store.
(b)
VOL (Volume Level Offset). This allows you to set the volume level for an individual
channel. Press v or V to adjust the volume level over a range of -7 to +7. Press OK to
store.
AFT (Automatic Fine Tune). This allows you to fine tune a channel. Press v or V to select
(c)
On. Alternatively, press v or V to manually adjust the tuning frequency over a range of -15
to +15. Press OK to store.
(d)
DECODER. This allows you to set a channel for viewing scrambled signals (e.g. from a
pay TV decoder). Press v or V to select AV1 or AV3 depending on which socket the
equipment is connected to. Press OK to store. The unscrambled signal now appears on
the selected channel.
20 Advanced Operation