Table of Contents
Advertisement
Copying data from P cards to the hard drive (continued)
Thumbnail displays of clips on the
hard drive
You can also display and manage thumbnails of
the clips stored on the hard drive just as you can
with clips on the P2 cards installed in the unit.
1
Display the HDD EXPLORE screen.
Using
and
displayed, and press
The clips of the partition are now displayed as
thumbnails.
1)
2)
3)
1) Display statuses
Displays the thumbnail display status of the
hard drive clips.
) Partition information
The following information is displayed.
SERIAL:
MODEL:
) Recording mode and system format
The recording mode of the clip at the cursor
position and system format are displayed.
6
, select the partition to be
.
Serial number of P2 card
Model name of P2 card
) Disk information
NUMBER (NO.): Partition number (1 to 23)
PARTITION:
DATE/TIME:
VERIFY:
NAME:
•
When the menu is displayed and "EXIT" is
selected, the HDD EXPLORE screen is restored.
•
If necessary, you can change the displays on the
thumbnail display screen. The steps taken to do
this are the same as for the thumbnail displays
for cards. Refer to "Changing the displays on
the thumbnail display screen" (Page 38). Other
operations (repair, connect, adding text memo,
etc.) are not available.
•
Clips can be deleted from the thumbnail display
screen of the FAT type of hard drive, but other
operations (repair, connect, adding text memo, etc.)
are not available.
•
With a FAT type of hard drive, clips after the first
thousand clips will not be displayed.
•
DATE/TIME is displayed in Coordinated Universal
4)
Time (UTC) with the P2 store hard drive.
Displaying the clip information on the
hard drive
You can display detailed information about clips
on the screen, and check it. This information is the
same as the properties of the clips on the P2 cards.
1
Select the target clip on the thumbnail
display screen of the hard drive.
You can display detailed information about clips
on the screen, and check it.
Press [MENU/MODE CHK].
Using
,
and
"CLIP PROPERTY", and press
For details, refer to "Displaying the clip
information" (Page 43).
Type of the hard disk is
displayed. (Page 69)
Partition recording date/time
Setting for verifying during
recording, and verifying results
ON/
The two sets of data
FINISHED:
have been verified
and found to match.
ON/
The two sets of
FAILED:
data have been
verified and found
not to match.
OFF:
The two sets of data
were not verified.
•
"– –" is displayed in the case
of a P2 store hard drive.
Partition name
, select "PROPERTY"–
.
Advertisement
Table of Contents
