1
2
Figure 33. Install the server into the rack
Connecting the supply and return hoses to the manifold
Attach quick-connects to the supply and return hoses.
The quick-connects press onto the mating half on the manifold. To install the quick-connects to the
supply and return hoses, complete the following step.
Press the hose end of the quick-connect onto the manifold end, until it clicks into place.
Figure 34. Installing the quick-connects to the supply and return hoses
Note: Connect one hose to the inner circuit of the manifold and the other hose to the outer circuit of the
manifold.
29
Installing the IBM Power System S822L (8247-22L)