Table of Contents
Advertisement
Figure 11. Securing the cable-management stop bracket to the support arm
4. Attach the cable-management stop bracket (B) to the slot on the inside of the left slide by sliding the
stop bracket (B) into the slide rail until the spring-loaded pin snaps into place. For details, see
Figure 12.
Figure 12. Extending the pin, and installing the bracket into the slide rail
5. Slide the extension bracket (E) into the right slide rail until the spring-loaded pin snaps into place. For
details, see Figure 13 on page 10.
Installing the IBM Power System S822L (8247-22L)
9
Advertisement
Table of Contents
