Av2 Output; Rgb Centring; Picture Rotation - Sony KV-28EW20U Instruction Manual

Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
!
If you select "AUTO", the output signal will always be the same one that is displayed on the screen.
If you have connected a decoder to the Scart
!
remember to change back the "AV2 Output" to "AUTO" or "TV" for correct unscrambling.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
16
Menu System
Level 2
Detail Set Up
Noise Reduction: Auto

AV2 Output:

TV

RGB Centring:

0

Picture Rotation:

0
OK
Detail Set Up
Noise Reduction: Auto
AV2 Output:
TV
RGB Centring: 0
Picture Rotation: 0
OK
Detail Set Up
Noise Reduction: Auto
AV2 Output: TV
RGB Centring: 0
Picture Rotation: 0
OK
Level 3 / Function
AV2 OUTPUT
The "AV2 Output" option in the "Detail Set Up"
menu allows you to select the source to be output
from the Scart connector
from this Scart any signal coming from the TV or
from external equipment connected to the Scart
i1/
connector
3.
If your VCR supports Smartlink, this procedure
is not necessary.
To do this: after selecting the option, press
press or to select the desired output signal:
TV, AV1, AV3, YC3 or AUTO.
i2/r
or to a VCR connected to this Scart, please
RGB CENTRING
When connecting an RGB source, such as a
"PlayStation", you may need to readjust the
horizontal position of the picture. In that case, you
can readjust it through the "RGB Centring" option in
the "Detail Set Up".
To do this: while watching an RGB source select the
"RGB Centring" option and press
or to adjust the centre of the picture between
–10 and +10. Finally press OK to confirm and store.
PICTURE ROTATION
Because of the earth's magnetism, the picture might
slant. In this case, you can correct the
picture slant by using the option "Picture
Rotation" in the "Detail Set Up" menu.
To do this: after selecting the option, press
press or to correct any slant of the picture
between -5 and +5 and finally press OK to store.
i2/r
. You can record
or side connectors
. Then press
3 and
. Then
. Then