Av2 Output; Rgb Centring; Picture Rotation - Sony FD TRINITRON KV-32LS35B Instruction Manual

Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
If you select "AUTO", the output signal will always be the same one that is displayed on
the screen.
If you have connected a decoder to the Scart
please remember to change back the "AV2 Output" to "AUTO" or "TV" for correct
unscrambling.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
16
Menu System Menu System
Level 2
Detail Set Up
Noise Reduction: Auto

AV2 Output:

TV

RGB Centring:

0

Picture Rotation:

0
OK
Detail Set Up
Noise Reduction: Auto
AV2 Output: TV
RGB Centring: 0
Picture Rotation: 0
OK
Detail Set Up
Noise Reduction: Auto
AV2 Output: TV
RGB Centring: 0
Picture Rotation: 0
OK
Level 3 / Function
AV2 OUTPUT
The "AV2 Output" option in the "Detail Set Up"
menu allows you to select the source to be
output from the Scart connector
You can record from this Scart any signal
coming from the TV or from external
equipment connected to the Scart connector
:1/
or side connectors
If your VCR supports Smartlink, this
procedure is not necessary.
To do this: after selecting the option, press
Then press or to select the desired
output signal: TV, AV1, AV3, YC3 or AUTO.
:2/q
or to a VCR connected to this Scart,
RGB CENTRING
When connecting an RGB source, such as a
"PlayStation", you may need to readjust the
horizontal position of the picture. In that case,
you can readjust it through the "RGB Centring"
option in the "Detail Set Up".
To do this: while watching an RGB source select
the "RGB Centring" option and press
press or to adjust the centre of the
picture between –10 and +10. Finally press OK
to confirm and store.
PICTURE ROTATION
Because of the earth's magnetism, the picture
might slant. In this case, you can correct the
picture slant by using the option "Picture
Rotation" in the "Detail Set Up" menu.
To do this: after selecting the option, press
Then press or
picture between -5 and +5 and finally press OK
to store.
:2/q
3 and
. Then
to correct any slant of the
.
3.
.
.