Noise Reduction; Av2 Output - Sony FD Trinitron KV-29LS40K Operating Instructions Manual

Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
14 Menu System
Level 2
Detail Set Up

Noise Reduction:

Auto

AV2 Output:

TV
RGB Centring: 0
Picture Rotation: 0
OK
Detail Set Up
Noise Reduction: Auto
AV2 Output: TV
RGB Centring:
0
Picture Rotation: 0
OK
Level 3 / Function
NOISE REDUCTION
The "Noise Reduction" option in the "Detail Set Up"
menu allows you to automatically reduce the picture
noise visible in the broadcast signal.
To do this: after selecting the option, press b. Then
press v or V to select Auto. Finally press OK to
confirm and store.
To cancel this function afterwards, select "Off"
instead of "Auto" in the step above.
AV2 OUTPUT
The "AV2 Output" option in the "Detail Set Up" menu
allows you to select the source to be output from the
Scart connector 2/
Scart any signal coming from the TV or from external
equipment connected to the Scart connectors
1/ or side connectors
If your VCR supports Smartlink, this procedure
is not necessary.
To do this: after selecting the option, press b. Then
press v or V to select the desired output signal: TV,
AV1, AV3, YC3 or AUTO.
If you select "AUTO", the output signal will
always be the same one that is displayed on the
screen.
If you have connected a decoder to the Scart
2/ or to a VCR connected to this Scart,
S
please remember to change back the "AV2
Output" to "AUTO"
unscrambling.
. You can record from this
S
3 and 3.
or "TV" for correct
continued...