Advertisement
Step 3
Position the telescopic rod vertically under the fixed ceiling
plate and extend the rod as far as possible between the ceiling
and the floor. The spring must fit exactly into the ceiling plate.
Notice!
First tighten the quick-release screw firmly by turning the quick-
release lever by hand.
Then fix both quick-release screws by closing the lever to en-
sure that the telescopic pole (1) is held firmly in place.
Step 4
Now turn the large plastic screw at the base of the bar clock-
wise. This gives the bicycle stand additional strength.
Step 5 (optional)
Secure the base plate of the tube to the floor using the screws,
washers and dowels provided.
Step 6
Tighten all the nuts on the bicycle stand using the hexagonal spanner provided so that the individual
parts do not slip or shift.
Notice!
Step 6 is absolutely necessary and must be followed in any case!
Step 7
When the tube is fully assembled and tightened, you can attach the two hook rails (3). Adjust them to
the height of your bicycles!
Step 8
You can now attach the four individual hooks (4) to the rails and
hang your bicycles to save space.
© by WilTec Wildanger Technik GmbH
Item 62831
Page 5
http://www.WilTec.de
http://www.aoyue.eu
07 2021-1
http://www.teichtip.de
Advertisement
